Long-Range Simultaneous Dual-band Wi-Fi® Module

Redpine’s communication module RS-SE-601 provides a secure, cost-effective and high performance solution for long-range Wi-Fi links. This module is ideally suited for aggregating local Wi-Fi data and transporting it to the utility network through back-haul point-to-point links or a city-wide Wi-Fi Mesh. RS-SE-601 with simultaneous dual-band 802.11n (dual-AP or AP-STA functionality), high transmit power in both 2.4GHz and 5GHz bands, coexistence filtering and a comprehensive host software package enables rapidly deployable wireless solutions for the Smart-energy metro-networks and the Smart-grid back-haul.


  • Simultaneous Dual band support (2.4 and 5 Ghz)
  • Output power up to 26 dbm
  • Supports the IEEE 802.11n draft standard
  • Dynamically monitors and adjusts power and data-rate per-packet and per-link to deliver maximum capacity
  • Integrates both bands in a single standard Mini-PCI card
  • Applications
  • Communication Module Specifications
  • Host Software Package Specifications


  • Smart Grid data aggregation cum back-haul nodes
  • Broadband CPE's for WISP
  • Wi-Fi Network for bundled Broadband and Energy management services
  • Outdoor Mesh Routers
  • Wireless Repeater and Bridge
  • Point-to-point Wi-Fi Back Haul

Communication Module Specifications

  • Radio-1:IEEE 802.11b/g, 802.11n Radio-2: IEEE 802.11a/b/g, 802.11n
  • 11n/a : 5.15 – 5.9GHz 11b/g/n : 2.4 – 2.5GHz
  • 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps 802.11g/a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps
  • WMM and WMM Power Save Support
  • Authentication: WPA, WPA2-Enterprise
  • MCS 0-7, RIFS, Rx STBC, Greenfield Protection A-MSDU, A-MPDU Aggregation with Block-ack
  • 5GHz : 26dBm 2.4GHz : 28dBm
  • 802.11b 1Mbps : -98dBm
    802.11g 54Mbps : -75dBm
    802.11a 54Mbps : -74dBm
    802.11g/n 65Mbps : -71.5dBm
  • 32-bit, 33MHz Mini-PCI
  • 3.3V ,5 V(+/-10%)
  • Industrial Grade-40ºC to +85ºC
  • HPF at 5GHz input to filter out 2.4GHz transmissions
    LPF at 2.4GHz input to filter out 5GHz transmissions
  • 5 V

Host Software Package Specifications


  • Full 802.11b/g, 802.11a, 802.11nClient and AP compatibility
  • 802.1q VLAN Support (ESSID and IP based tagging)
  • Wireless Bridge , Repeater and Mesh support
  • Support for static and dynamic addressing for wireless clients
  • DHCP Server


  • 802.1p/q with 4 queues per VLAN and ESSID
  • 802.1p and DSCP


  • RADIUS Authentication
  • Local and Remote Management Tools via HTTPS
  • Software Upgrades with Rollback
  • Command Line Interface (CLI) via SSH
  • Wireless, Network and Client Monitoring and Statistics


  • AES encryption of mesh and control traffic
  • Multiple BSSIDs & ESSIDs (ESSID suppression)
  • Client Access Control Lists