1x1 802.11abgn + BT4.0 + ZigBee® embedded combo Module

RS9113 Connect-io-n™ Module Family

The RS9113 Connect-io-n™ module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO, UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine’s proven low power innovations from Lite-FiTM products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices.


Features and Benefits

  • RS9113 Connect-io-n module integrates WLAN, BT 4.0 and ZigBee functions.
  • WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
  • Bluetooth: Compliant to dual-mode Bluetooth V4.0
  • ZigBee: Compliant to IEEE 802.15.4
  • Supports both 20MHz and 40MHz bandwidth.
  • WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm.
  • Support for Bluetooth Transmit power class-1 with integrated PA and high performance Bluetooth receiver with -94dBm Rx sensitivity.
  • Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform ance ZigBee receiver with -100dBm Rx sensitivity.
  • U.FL connector for external antenna connection is selectable.
  • Dual external antenna (diversity supported).
  • Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server.
  • Support for Embedded Client mode and Access Point mode.
  • BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP.
  • Supports SPI, UART, USB, SDIO host interfaces.
  • Can operate with 8-bit microcontrollers with no OS.
  • Single supply 3.0 to 3.6 V operation.

Product Variants

  • Wi-Fi band of operation
    • Single band (2.4 GHz)
    • Dual band (2.4 GHz and 5 GHz)
  • Antenna
    • No embedded antenna
    • One embedded antenna and a u.FL connector for external antenna
  • Wireless configurations
    • Wi-Fi only
    • Wi-Fi + Bluetooth
    • Wi-Fi + ZigBee
    • Wi-Fi + Bluetooth + ZigBee

Part Numbering Convention

    RS9113-XYZ-ABC
    Where,

  • X = “N” if Wi-Fi is present or “0” if Wi-Fi is absent
  • Y = “B” if Bluetooth is present or “0” if Bluetooth is absent
  • Z = “Z” if ZigBee is present or “0” if ZigBee is absent
  • A = “S” for Single band Wi-Fi (2.4 GHz) or “D” for Dual band Wi-Fi (2.4 GHz/5 GHz)
  • B = “0” for no antenna package or “1” for single antenna package
  • C = “N” for n-Link product family, “C” for Connect-io-n product family, “W” for WiSeConnect product family
  • Examples:

  • RS9113-NBZ-S0C refers to single band Connect-io-n module with no antenna and integrated Wi-Fi, Bluetooth and ZigBee
  • RS9113-N00-D1C refers to a dual band Connect-io-n module with embedded single antenna and integrated Wi-Fi


  • Reference
  • Applications
  • Specifications
  • Software Package
  • Footprint
  • System Diagram

Module Reference Design

    Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for manufacture testing and diagnostics.
    For details on availability please contact sales.