WiSeMote™ Asset Tags

Asset Tags

The WM6 WiSeMote® asset tag, a part of Redpine's RTLS system offering, is a locationing device that enables the tracking of the location of an asset through any of multiple connectivity technologies including dual-band Wi-Fi®, BLE, Low Frequency, and Infrared. It can operate in multiple modes - Cisco CCX in conjunction with Cisco infrastructure, standard Wi-Fi setup with other locationing infrastructure, or any third-party Wi-Fi setup with the WiSeMote locationing solution.

The WM6 tag is suitable for tracking a variety of devices and equipment with multiple methods of attachment and includes tamper sensing, motion detection, multi-colour LEDs, and two-way communication options. The tag also provides information to the system on battery life, emergency button press, motion detection, chokepoint excitation, and other events. The WM6 tag supports both 2.4 GHz and 5 GHz Wi-Fi - making it ideal for new installations where all mission critical communication is carried out exclusively in the 5 GHz band.

The WM6 tag works with Redpine's unique Wi-Fi based Chokepoint Exciter while also being compatible with legacy low frequency based excitation. Its built-in BLE mode enables proximity sensing of assets with a companion mobile phone app, and it provides for room-level accuracy options with supporting infrared infrastructure. The tag uses a replaceable battery with a life of over two years based on the mode of operation.

The WM6 tag is compliant for intrinsically safe operation in zone 0 environments -the most stringent in terms of requirements for operation in hazardous zones.


  • IEEE 802.11a/b/g/n compliant
  • BLE beaconing and IR support
  • Provides telemetry information like battery life, motion and temperature
  • Wireless configurability using web application
  • Over-the-air Firmware Upgrade capable
  • Replaceable battery with battery life of over 2 years
  • Cisco CCX compliant
  • Supports associated modes of operation for WiSeMote locationing solutions
  • Emergency button for raising alarms and notifications
  • Supports both 2.4 GHz and 5 GHz
  • IP65 compliant for wash ability and outdoor use
  • Intrinsic safety for mining and hazardous environments - Compliant to IEC60079-11 for zone 0


  • Single band: IEEE 802.11b/g/n
    Dual band: IEEE 802.11a/b/g/n
    BT 4.2
  • 2.4 GHz:
    North America: Channels 1 -11
    Global: Channels 1-13
    5 GHz:
    Channels 36-48, 149-165
  • 15 dBm
  • 60 x 45 X 20 mm
  • IP-65 - dust proof, splash proof
  • -20°C to +60°C
  • 0 to 95% RH, non-condensing
  • Tray, Cable tie, Loop, Strap, Adhesive
  • 3 V, 1700 mAh, user replaceable
  • Over 2 years, based on configuration
  • Contains FCC, IC, ETSI certified wireless module
  • IEC60079-11 for Zone 0
  • Using WM0 wireless configurator, web page based, no software needs to be installed.
  • Push button for emergency notification
  • Battery charge indicator, Configuration, Other notifications
  • 1 Mbps to 65 Mbps Up to 150 meters outdoor
  • With WM-CPE-L Chokepoint Exciter:
    Wi-Fi based wake-up
    LF based wake-up


  • Asset and Personnel Tracking in Industrial, Mining, and O&G operations
  • Enhance worker safety and visibility
  • Optimize vehicle utilization by monitoring location of vehicles
  • Monitor environment temperature to ensure optimal working conditions
  • Instantly identify and locate missing personnel
  • Prevent collisions between vehicles, people, and other assets with proximity detection and alerts
  • Get alert in the event of prolonged personnel inactivity
  • Eliminate unauthorized access to specific areas
  • Resolve problems related to production with production tracking