RS9113 Connect-io-n™ Module Family

Description

The RS9113 Connect-io-n™ module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine's proven low power innovations from Lite-Fi™ products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices.

Design Diagram

Features

  • RS9113 Connect-io-n module integrates WLAN, BT 4.0 and ZigBee functions.
  • WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
  • Bluetooth: Compliant to dual-mode Bluetooth V4.0
  • ZigBee: Compliant to IEEE 802.15.4
  • Supports both 20MHz and 40MHz bandwidth.
  • WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm.
  • Support for Bluetooth Transmit power class-1 with integrated PA and high performance Bluetooth receiver with -94dBm Rx sensitivity.
  • Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform ance ZigBee receiver with -100dBm Rx sensitivity.
  • U.FL connector for external antenna connection is selectable.
  • Dual external antenna (diversity supported).
  • Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server.
  • Support for Embedded Client mode and Access Point mode.
  • BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,A2DP,ACRP.
  • Supports SPI, UART, USB host interfaces.
  • Can operate with 8-bit microcontrollers with no OS.
  • Single supply 3.0 to 3.6 V operation.

Product Variants

  • Wi-Fi band of operation
    • Single band (2.4 GHz)
    • Dual band (2.4 GHz and 5 GHz)
  • Antenna
    • No embedded antenna
    • One embedded antenna and a u.FL connector for external antenna
  • Wireless configurations
    • Wi-Fi only
    • Wi-Fi + Bluetooth
    • Wi-Fi + ZigBee
    • Wi-Fi + Bluetooth + ZigBee

    Redpine offers form-factor SPI, USB2.0 and UART reference designs along with software for manufacture testing and diagnostics.
    For details on availability please contact sales.

Specifications

  • IEEE 802.11a/b/g/j, 802.11n, 802.11d/e/i/w, 802.1X, 802.11k/r/v/h
    Bluetooth v2.1 + EDR, v3.0 + HS, v4.0
    802.15.4-2009 (2.4 GHz)
  • 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7)
    802.11a/g: from 6 Mbps to 54 Mbps
    802.11b: from 1 Mbps to 11 Mbps
    Bluetooth: 1, 2, 3Mbps
    802.15.4-2009: 250Kbps
  • OFDM with BPSK, QPSK, 16-QAM and 64-QAM
    802.11b with CCK and DSSS
    Bluetooth: GFSK, DQPSK, 8DPSK
    802.15.4-2009: DSSS
  • WMM and WMM Power Save Support
  • 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU inside A-MPDU, PSMP, MTBA, Fragmentation and Virtual AP support (up to 8 BSSIDs)
  • Scatternet, Adaptive Frequency Hopping, Interlaced scanning, 15 active slaves in proprietary mode, hold, sniff and park modes
  • CCM* security, orphan scanning, coordinator realignment, mesh routing
  • Embedded Wi-Fi client and Access point
  • TCP, UDP, DHCP, ARP, IGMP, DNS client. Integrated web server.
  • Master, slave, scatternet
  • ZigBee Coordinator, Router, End device
  • USB 2.0, SPI, UART
  • I2C, I2S, SPI, QSPI, UART, GPIO, JTAG, Analog and Ultra-low-power peripherals
  • 3.0-3.6V, 1.8-3.6V
  • Industrial Grade -40°C to +85°C
  • Wi-Fi: 18 dBm for 802.11b DSSS
    17 dBm for 802.11g/n OFDM
    15 dBm for 802.11a/g/n OFDM
    Bluetooth: 19dBm
    ZigBee: 19dBm
  • Wi-Fi: 1 Mbps -97 dBm (< 8% PER)
    54 Mbps -76.5 dBm (< 10% PER)
    MCS7 (20MHz) -72 dBm (< 10% PER)
    MCS7 (40MHz) -69 dBm (< 10% PER)
    Bluetooth: 1 Mbps -93 dBm
    2 Mbps -93 dBm
    3 Mbps -84 dBm
    BTLE (1Mbps) -91 dBm
    ZigBee: 250 Kbps -101 dBm (< 8% PER)

Product Brief

Title Type Size Date
PDF 1090 KB 31 Jan 2019
PDF 20700 KB 22 Feb 2019


Datasheet

Title Type Size Date
PDF 3930 KB 22 Feb 2019

To access the additional RS9113 documents, please click here

Modules

Part Number Product Image Datasheet Wireless Variant Frequency Band Dimensions
(l x w x h; mm)
Package Type,
Pin Count
Integrated Antenna Buy Now
RS9113-NB0-D0C Datasheet Wi-Fi + BT Dual Band 14 x 15 x 2.1 LGA,101 No Buy
RS9113-NB0-D1C Datasheet Wi-Fi + BT Dual Band 16 X 27 X 3.1 LGA, 79 Yes Buy
RS9113-NB0-S0C Datasheet Wi-Fi + BT Single Band 14 x 15 x 2.1 LGA,101 No Buy
RS9113-NB0-S1C Datasheet Wi-Fi + BT Single Band 16 X 27 X 3.1 LGA, 79 Yes Buy
RS9113-NBZ-D0C Datasheet Wi-Fi + BT + ZB Dual Band 14 x 15 x 2.1 LGA,101 No Buy
RS9113-NBZ-D1C Datasheet Wi-Fi + BT + ZB Dual Band 16 X 27 X 3.1 LGA, 79 Yes Buy
RS9113-NBZ-S0C Datasheet Wi-Fi + BT + ZB Single Band 14 x 15 x 2.1 LGA,101 No Buy
RS9113-NBZ-S1C Datasheet Wi-Fi + BT + ZB Single Band 16 X 27 X 3.1 LGA, 79 Yes Buy

RS9113 EVKs

Part Number Product Image Wireless Variant User Guides Frequency Band Buy Now
RS9113-NBZ-S1X-EVB Wi-Fi + BT 5 + ZB RS9113 EVB Product Brief Single Band Buy
RS9113-NBZ-D1X-EVB Wi-Fi + BT 5 + ZB RS9113 EVB Product Brief Dual Band Buy