RS9116N-DBT0-BRS Dual-band 802.11 b/g/n Wi-Fi, Dual-mode Bluetooth 5 and 802.15.4

Wi-Fi

• Compliant to 1x1 IEEE 802.11 a/b/g/n, 802.11j (hosted mode) with single band/dual band (2.4 and 5 GHz ) support
• Support for 20 MHz and 40 MHz channel bandwidths
• Transmit power up to +20dBm in 2 GHz and +16 dBm in 5 GHz
• Receive sensitivity as low as -98 dBm in 2 GHz and - 93 dBm in 5 GHz
• Data Rates:- 802.11b: Upto11 Mbps ; 802.11g/a:Up to 54 Mbps ; 802.11n: MCS0 to MCS7
• Operating Frequency Range:- 2412 MHz – 2484 MHz, 4.9 GHz – 5.975 GHz

Bluetooth

• Compliant to dual-mode Bluetooth 5
• Transmit power up to +20 dBm with integrated PA
• Receive sensitivity:- LE: -95 dBm, LR 125 Kbps: -106 dBm
• <8 mA transmit current in BT 5 mode, 2 Mbps data rate
• Data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2Mbps, 3 Mbps
• Operating Frequency Range:- 2.402 GHz - 2.480 GHz
• EDR+2.1, 4.0, 4.1, 4.2 and 5.0
• BT LE 1 Mbps, 2 Mbps, and Long Range modes
• BLE Secure connections
• BLE supports 8 center roles and 2 peripheral roles concurrently.
• BT auto rate and auto TX power adaptation
• Piconet with Seven active logical links. Scatternet with two slave roles while still being visible.
• BT inbuilt stack support for L2CAP, AVDTP, AVCTP, RFCOMM, SDP, ATT, SMP
• BT profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, GATT, IAP1, IAP2, HID

802.15.4

• Compliant to IEEE 802.15.4, 2.4 GHz
• Transmit power up to +20 dBm with integrated PA
• Receive sensitivity of -103 dBm

RF Features

• Integrated baseband processor with calibration memory, RF transceiver, and power amplifiers
• Dual external antenna (diversity supported)

Power Consumption

• Wi-Fi Standby Associated mode current: 40uA @ 1- second beacon listen interval
• Wi-Fi 1 Mbps Listen current: 14mA
• Wi-Fi LP chain Rx current: 19mA
• Deep sleep current <1uA, Standby current (RAM retention) < 10uA

Operating Conditions

• Wide operating supply range: 1.75 V to 3.63 V
• Operating temperature: -40ºC to +85ºC (Industrial grade)

Size

Small Form Factor: 8 mm x 8.8 mm x 1.172 mm

Evaluation Kit

• Dual Band EVK: RS9116-DBT0-EVK1

Development Environment

• Redpine WiSeStudio™ unified development platform

Hosted Mode (n-Link™)

• Hosted mode (n-Link): Wi-Fi stack, Bluetooth stack and profiles, ZigBee stack and profiles, Thread stack and all network stacks reside on the host processor
• Available host interfaces: SDIO 2.0 and USB HS
• Supported Peripherals: I2S, PCM, I2C, LED and UART debug interface
• Application data throughput up to 100 Mbps (Hosted Mode) in 802.11n with 40 MHz bandwidth and up to 50 Mbps with 20 MHz bandwidth
• Host drivers for Linux, Android™, and Windows®
• Support for Client mode, Access point mode (Up to 32 clients), Wi-Fi Direct, Concurrent Client and Access Point mode, Enterprise Security
• Support for concurrent modes between Wi-Fi, dualmode Bluetooth 5, Thread, Zigbee
• Support for multiple Virtual Access Points

Security

• Hardware device identity and key storage with PUF based secure Roots-of-trust (RoT)
• Accelerators: AES128/256, SHA256/384/512, HMAC, RSA, ECC, ECDH, RNG, CRC
• WPA2/WPA3-Personal, WPA2/WPA3 Enterprise for Client, EAP-TLS, EAP-FAST, EAP-TTLS, EAP-LEAP, PEAP-MSCHAP-v2
• True Random Number Generator
• Secure Boot
• Secure Firmware upgrade with backup
• FIPS140-2 compliant

Software and Regulatory Certification

• Regulatory certifications (FCC, IC, ETSI/CE, TELEC)¹
• Wi-Fi Alliance¹
• ZigBee Certification¹, Bluetooth Qualification¹
• FIPS 140-2 Certification¹