LGA Module (B00)

4.63 mm X 7.90 mm

RS14100-SB00-B00 Single-band 802.11 b/g/n Wi-Fi with Cortex-M4F

Description

Redpine Signals' RS14100 single band modules, B00 are Wireless Secure MCUs with a comprehensive multi-protocol wireless sub-system. It has an integrated ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals and integrated power-management. The modules are FCC, IC, and ETSI/CE certified. An ARM Cortex-M4F running up to 180MHz and Redpine's ThreadArch 4-Threaded processor running up to 160MHz. The Cortex-M4F is dedicated for peripheral and application related processing whereas all the networking and wireless stacks run on independent threads of the ThreadArch. The wireless subsystem has low-cost CMOS integration of a multi-threaded MAC processor (threadArch®), baseband digital signal processing, analog front-end, calibration eFuse, 2.4GHz RF transceiver and integrated power amplifier thus providing a fully-integrated solution for a range of embedded wireless applications. The SOCs are FCC, IC, and ETSI/CE certified.

Design Diagram

Project Image

Features

Microcontroller
  • ARM Cortex-M4F core with up to 180 MHz, 225 DMIPS performance
  • Integrated FPU, MPU and NVIC
  • SWD and JTAG debug options
  • Internal and external oscillators with PLLs
  • Flash In-Application Programming (IAP), In-System Programming (ISP) and Over-the-Air Wireless Firmware Upgrade
  • Power-On Reset (POR), Brown-Out and Black-out Detect (BOD) with separate thresholds
  • Support Multiple power domains to achieve lower current consumption
Memory
  • Up to 4 MB integrated or external Quad-SPI flash with inline AES engine and XIP
  • Up to 208 KB SRAM
  • 64 KB ROM has boot code and software drivers
  • 32 byte One-time programmable (eFuse) memory
  • 4-way set-associative 16 KB I-Cache
Security
  • HW device identity and key storage with PUF
  • Trusted Execution Environment with Secure Boot loader
  • Accelerators: AES128/256, SHA256/384/512, HMAC, RSA, ECC, ECDH, RNG, CRC
  • Secure XIP from flash
  • Secure boot loading performed by secure processor
  • Secure firmware update
  • Tamper detection with Hardware disable, Secure RTC, Secure Hardware Watchdog and other Secure Peripherals connected to the Trusted Execution Environment.
  • Programmable Secure Hardware Write protect for Flash sectors
Digital Peripherals
  • USB HS OTG with integrated HS transceiver
  • 10/100 Mbps Ethernet MAC with RMII
  • SD/SDIO MMC 3.0 card host, SDIO 2.0 slave
  • 3x USART, 4x SPI, 3x I2C, 2x I2S, SIO, CAN 2.0B
  • Timers: 5x 32-bit, 1x 16/32-bit, 1x 24-bit, WWDT, RTC, RIT, QEI
  • Up to 42 GPIOs with GPIO multiplexer
  • Companion Chip Interface(CCI), FIM
Analog Peripherals
  • 12-bit 16-ch, 5 Msps ADC, 10-bit DAC
  • 3x Op-amps, 2x Comparators, IR detector and Temperature Sensor
  • 8 capacitive touch sensor inputs
  • Voice Activity Detection (VAD)
Wi-Fi
  • Compliant to single-spatial stream IEEE 802.11 b/g/n with single band support
  • Support for 20 MHz and 40 MHz channel bandwidths
  • Transmit power up to +18 dBm with integrated PA
  • Receive sensitivity as low as -96 dBm
  • Data Rates:- 802.11b: Upto 11 Mbps ; 802.11g: Upto 54 Mbps ; 802.11n: MCS0 to MCS7
  • Operating Frequency Range:- 2412 MHz – 2484 MHz
Bluetooth
  • Compliant to dual-mode Bluetooth Low Energy
  • Transmit power up to +16 dBm with integrated PA
  • Receive sensitivity:- LE: -92 dBm, LR 125 Kbps: -102 dBm
  • <8 mA transmit current in Bluetooth Low Energy mode, 2 Mbps data rate
  • Data rates: 125 kbps, 500 kbps, 1 Mbps, 2Mbps, 3 Mbps
  • Operating Frequency Range:- 2.402 GHz - 2.480 GHz
  • EDR+2.1, 4.0, 4.1, 4.2 and 5.0
  • Bluetooth Low Energy 1 Mbps, 2 Mbps and Long Range modes
  • Bluetooth Low Energy Secure connections
  • Bluetooth Low Energy supports 8 center roles and 2 peripheral roles concurrently.
  • Bluetooth auto rate and auto TX power adaptation
  • Piconet with Seven active logical links. Scatternet with two slave roles while still being visible.
  • Bluetooth inbuilt stack support for L2CAP, AVDTP, AVCTP, RFCOMM, SDP, ATT, SMP
  • Bluetooth profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, GATT, IAP1, IAP2, HID
RF Features
  • Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun and T/R switch
Embedded Wi-Fi Stack
  • Support for Embedded Wi-Fi Client mode, Wi-Fi Access point mode, Wi-Fi Direct and Enterprise Security
  • Supports advanced Wi-Fi security features: WPA/WPA2-Personal and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, PEAP-MSCHAP-V2)
  • Integrated TCP/IP stack (IPv4/IPv6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS 1.2, Web sockets, IGMP, DNS, DNS-SD, SNMP, FTP Client
  • Over-the-Air Wireless firmware upgrade and provisioning
  • Support for concurrent Wi-Fi, dual-mode Bluetooth Low Energy
Embedded Bluetooth Stack
  • EDR+2.1, 4.0, 4.1, 4.2 and 5.0
  • Bluetooth Low Energy 1 Mbps, 2 Mbps and Long Range modes
  • Bluetooth Low Energy Secure connections
  • Bluetooth Low Energy supports 8 center roles and 2 peripheral roles concurrently.
  • Bluetooth auto rate and auto TX power adaptation
  • Piconet with Seven active logical links. Scatternet with two slave roles while still being visible.
  • Bluetooth inbuilt stack support for L2CAP, AVDTP, AVCTP, RFCOMM, SDP, ATT, SMP
  • Bluetooth profile support1 for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, GATT, IAP1, IAP2, HID
MCU Sub-system Power Consumption
  • Active current as low as 19uA/MHz in low power mode
  • Active current as low as 65uA/MHz in high power mode
  • Deep sleep mode current: ~450nA
  • Dynamic Voltage & Frequency Scaling
  • Deep sleep mode with only timer active – with and without RAM retention
Power States
  • Reset State
  • Active States
    • PS1
    • PS2
    • PS3
    • PS4
  • Standby States
    • PS2-STANDBY
    • PS3-STANDBY
    • PS4-STANDBY
  • Sleep States
    • PS2-SLEEP
    • PS3-SLEEP
    • PS4-SLEEP
  • Shutdown States
    • PS0
Wireless Sub-system Power Consumption
  • Wi-Fi Standby Associated mode current: 40uA @ 1-second beacon listen interval
  • Wi-Fi 1 Mbps Listen current: 14mA
  • Wi-Fi LP chain Rx current: 19mA
  • Deep sleep current <1uA, Standby current (RAM retention) < 10uA
Software and Regulatory Certification
  • Wi-Fi Alliance1
  • Bluetooth Qualification1
  • FIPS 140-2 Certification1
  • Regulatory certifications support (FCC, IC, CE/ETSI, TELEC)1
Operating Conditions
  • Wide operating supply range: 1.75 V to 3.63 V
  • Operating temperature: -40°C to +85°C (Industrial grade)
Evaluation Kit
  • WiSeMCU Single Band EVK: RS14100-SB-EVK1
Development Environment
  • Redpine WiSeStudio unified development platform

Applications

Wearables:
  • SmartWatches
  • Wristbands
  • Fitness Monitors
  • Smart Glasses, etc

SmartHome:
  • Smart Locks
  • Motion/Entrance Sensors
  • Water Leak sensors
  • Smart plugs /switches
  • LED lights
  • Door-bell cameras
  • Washers/Dryers
  • Refrigerators
  • Thermostats
  • Consumer Security cameras
  • Voice Assistants, etc
Other consumer applications:
  • Toys
  • Anti-theft tags
  • Smart dispensers
  • Weighing scales
  • Blood pressure monitors
  • Blood sugar monitors
  • Portable cameras, etc
Other Applications (Medical, Industrial, Retail, Agricultural, Smart-City, etc.):
  • Healthcare Tags
  • Medical patches/pills
  • Infusion pumps
  • Sensors/actuators in Manufacturing
  • Electronic Shelf labels
  • Agricultural sensors
  • Product tracking tags
  • Smart Meters
  • Parking sensors
  • Street LED lighting
  • Automotive After-market
  • Security Cameras, etc

Product Brief

Title Type Size Date
RS14100 WiSeMCU Product Brief PDF 1.41 MB Apr 2020


Datasheet

Title Type Version Size Date
RS14100 B00 WiSeMCU Module Datasheet PDF v1.0.6 6.28 MB Aug 2020


EVK Resources

Title Type Version Size Date
RS14100 EVK Demo Guide PDF v1.0 3.50 MB May 2019
RS14100 EVK Getting Started Guide PDF v1.5 15.40 MB Jun 2019


Hardware Resources

Title Type Version Size Date
3D Models Dimensions
RS14100-B00 ZIP 11.72 MB Mar 2019
Symbols
RS14100-B00 ZIP 3.14 KB Mar 2019


Software Resources

Title Type Version Size Date
AWS User Guide PDF v2.0 1.30 MB Mar 2020
Hardware Reference Manual PDF v1.1 24.77 MB Apr 2019
WiSeMCU Embedded BLE Software Programming Reference Manual(PRM) PDF v1.6 767.25 KB Apr 2019
WiSeMCU Embedded BT Classic Software Programming Reference Manual(PRM) PDF v1.6 967.66 KB Apr 2019
Redpine MCU SAPI User Manual PDF v1.4 9.99 MB Apr 2019
Embedded WLAN Software Programming Reference Manual(PRM) PDF v1.7 6.02 MB Apr 2019
RS14100 Wireless SAPI Examples PDF v1.6 21.54 MB Apr 2019
RS14100 Wireless SAPI Manual PDF v1.7 2.15 MB Apr 2019
RS14100 TCP IP Feature Selection xlsx v1.0.0 248.26 KB Apr 2019

Development tools

Title Technical Documents Download
WiSeStudio WiSeStudio User Guide Download

Tools & Softwares

Title Type Size Date
Redpine Connect Application ZIP 4.99 MB Nov 2019
RS14100 WiSeMCU 1.1.3 ZIP 97.94 MB Jan 2020

EVKs

Part Number Wireless Variant User Guides Frequency Band Integrated Antenna Buy Now
RS14100-SB-EVK1 Wi-Fi + Bluetooth Low Energy RS14100 EVK Getting Started Guide Single Band Antenna and u.FL Connector Contact us
RS14100-DB-EVK1 Wi-Fi + Bluetooth Low Energy RS14100 EVK Getting Started Guide Dual Band Antenna and u.FL Connector Contact us

Certifications and Declarations

Title Type Version Size Date
RoHS REACH ZIP 358.88 KB Nov 2019
BTSIG Certification ZIP 504.54 KB Jul 2019