WLCSP (WMS)

3.51 mm X 3.60 mm

RS14100-DB00-CC1 Dual-band 802.11 a/b/g/n Wi-Fi with Cortex-M4F

Description

Redpine Signals' RS14100 single band CA1 modules and dual band CC1 modules are Wireless Secure MCUs with a comprehensive multi-protocol wireless sub-system. It has an integrated ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals and integrated power-management. An ARM Cortex-M4F running up to 180MHz and Redpine's ThreadArch 4-Threaded processor running up to 160MHz. The Cortex-M4F is dedicated for peripheral and application related processing whereas all the networking and wireless stacks run on independent threads of the ThreadArch. The wireless subsystem has low-cost CMOS integration of a multi-threaded MAC processor (threadArch®), baseband digital signal processing, analog front-end, calibration eFuse, 2.4GHz RF transceiver and integrated power amplifier thus providing a fully-integrated solution for a range of embedded wireless applications. The modules are FCC, IC, and ETSI/CE certified.

Design Diagram

Project Image

Features

Microcontroller
  • ARM Cortex-M4F core with up to 180 MHz, 225 DMIPS performance
  • Integrated FPU, MPU and NVIC
  • SWD and JTAG debug options
  • Internal and external oscillators with PLLs
  • Flash In-Application Programming (IAP), In-System Programming (ISP) and Over-the-Air Wireless Firmware Upgrade
  • Power-On Reset (POR), Brown-Out and Black-out Detect (BOD) with separate thresholds
  • Support Multiple power domains to achieve lower current consumption
Memory
  • Up to 4 MB integrated or external Quad-SPI flash with inline AES engine and XIP
  • Up to 208 KB SRAM
  • 64 KB ROM has boot code and software drivers
  • 32 byte One-time programmable (eFuse) memory
  • 4-way set-associative 16 KB I-Cache
Security
  • HW device identity and key storage with PUF
  • Trusted Execution Environment with Secure Boot loader
  • Accelerators: AES128/256, SHA256/384/512, HMAC, RSA, ECC, ECDH, RNG, CRC
  • Secure XIP from flash
  • Secure boot loading performed by secure processor
  • Secure firmware update
  • Tamper detection with Hardware disable, Secure RTC, Secure Hardware Watchdog and other Secure Peripherals connected to the Trusted Execution Environment.
  • Programmable Secure Hardware Write protect for Flash sectors
Digital Peripherals
  • USB HS OTG with integrated HS transceiver
  • 10/100 Mbps Ethernet MAC with RMII
  • SD/SDIO MMC 3.0 card host, SDIO 2.0 slave
  • 3x USART, 4x SPI, 3x I2C, 2x I2S, SIO, CAN 2.0B
  • Timers: 5x 32-bit, 1x 16/32-bit, 1x 24-bit, WWDT, RTC, RIT, QEI
  • Up to 40 GPIOs with GPIO multiplexer
  • Companion Chip Interface(CCI), FIM
Analog Peripherals
  • 12-bit 16-ch, 5 Msps ADC, 10-bit DAC
  • 3x Op-amps, 2x Comparators, IR detector and Temperature Sensor
  • 8 capacitive touch sensor inputs
  • Voice Activity Detection (VAD)
Wi-Fi
  • Compliant to single-spatial stream IEEE 802.11 a/b/g/n with single band (2.4 GHz in CA1 module) and dual band (2.4 and 5 GHz in CC1 module) support
  • Support for 20 MHz and 40 MHz channel bandwidths
  • Transmit power up to +18dBm in 2 GHz and +13.5 dBm in 5 GHz
  • Receive sensitivity as low as -96 dBm in 2 GHz and -89 dBm in 5 GHz
  • Data Rates:- 802.11b:Upto11 Mbps ; 802.11g/a:Upto54 Mbps ; 802.11n: MCS0 to MCS7
  • Operating Frequency Range:- 2412 MHz – 2484 MHz, 4.9 GHz – 5.975 GHz
  • Application data throughput up to 40 Mbps in integrated-TCP/IP stack mode
Bluetooth
  • Compliant to dual-mode Bluetooth 5
  • Transmit power up to +20 dBm with integrated PA
  • Receive sensitivity:- LE: -95 dBm, LR 125 Kbps: -106 dBm
  • <8 mA transmit current in BT 5 mode, 2 Mbps data rate
  • Data rates: 125 kbps, 500 kbps, 1 Mbps, 2Mbps, 3 Mbps
  • Operating Frequency Range:- 2.402 GHz - 2.480 GHz
  • EDR+2.1, 4.0, 4.1, 4.2 and 5.0
  • BT LE 1 Mbps, 2 Mbps and Long Range modes
  • BLE Secure connections
  • BLE supports 8 center roles and 2 peripheral roles concurrently.
  • BT auto rate and auto TX power adaptation
  • Piconet with Seven active logical links. Scatternet with two slave roles while still being visible.
  • BT inbuilt stack support for L2CAP, AVDTP, AVCTP, RFCOMM, SDP, ATT, SMP
  • BT profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, GATT, IAP1, IAP2, HID
RF Features
  • Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun and T/R switch
  • Integrated Antenna and u.FL connector
  • Diversity is supported
Embedded Wi-Fi Stack
  • Support for Embedded Wi-Fi Client mode, Wi-Fi Access point mode, Wi-Fi Direct and Enterprise Security
  • Supports advanced Wi-Fi security features: WPA/WPA2-Personal and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, PEAP-MSCHAP-V2)
  • Integrated TCP/IP stack (IPv4/IPv6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS 1.2, Web sockets, IGMP, DNS, DNS-SD, SNMP, FTP Client
  • Over-the-Air Wireless firmware upgrade and provisioning
  • Support for concurrent Wi-Fi, dual-mode Bluetooth 5
Embedded Bluetooth Stack
  • EDR+2.1, 4.0, 4.1, 4.2 and 5.0
  • BT LE 1 Mbps, 2 Mbps and Long Range modes
  • BLE Secure connections
  • BLE supports 8 center roles and 2 peripheral roles concurrently.
  • BT auto rate and auto TX power adaptation
  • Piconet with Seven active logical links. Scatternet with two slave roles while still being visible.
  • BT inbuilt stack support for L2CAP, AVDTP, AVCTP, RFCOMM, SDP, ATT, SMP
  • BT profile support1 for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, GATT, IAP1, IAP2, HID
MCU Sub-system Power Consumption
  • Active current as low as 19uA/MHz in low power mode
  • Active current as low as 65uA/MHz in high power mode
  • Deep sleep mode current: ~450nA
  • Dynamic Voltage & Frequency Scaling
  • Deep sleep mode with only timer active – with and without RAM retention
Power States
  • Reset State
  • Active States
    • PS1
    • PS2
    • PS3
    • PS4
  • Standby States
    • PS2-STANDBY
    • PS3-STANDBY
    • PS4-STANDBY
  • Sleep States
    • PS2-SLEEP
    • PS3-SLEEP
    • PS4-SLEEP
  • Shutdown States
    • PS0
Wireless Sub-system Power Consumption
  • Wi-Fi Standby Associated mode current: 40uA @ 1-second beacon listen interval
  • Wi-Fi 1 Mbps Listen current: 14mA
  • Wi-Fi LP chain Rx current: 19mA
  • Deep sleep current <1uA, Standby current (RAM retention) < 10uA
Software and Regulatory Certification
  • Wi-Fi Alliance1
  • Bluetooth Qualification1
  • FIPS 140-2 Certification1
  • Regulatory certifications support (FCC, IC, CE/ETSI, TELEC)1
Operating Conditions
  • Wide operating supply range: 1.75 V to 3.63 V
  • Operating temperature: -40ºC to +85ºC (Industrial grade)
Evaluation Kit
  • WiSeMCU Single Band EVK: RS14100-SB-EVK1
  • WiSeMCU Dual Band EVK: RS14100-DB-EVK1
Development Environment
  • Redpine SmartStudio unified development platform

Applications

  • Home Automation
  • Smart Audio
  • Wearables & Fitness
  • Internet of Things (IoT)
  • Industrial Automation
  • Healthcare

Product Brief

Title Type Size Date
PDF 1411 KB 30 April 2019


Datasheet

Title Type Version Size Date
PDF v1.0.3 4.06 MB 29 July 2019


EVK Resources

Title Type Version Size Date
PDF v1.0 3587 KB 9 May 2019
PDF v1.5 15.3 MB 4 June 2019


Hardware Resources

Title Type Version Size Date
3D Models Dimensions
Zip 2444 KB 22 March 2019
Certifications and Declarations
PDF v1.0 405 KB 9 May 2019
Zip 9761 KB 22 March 2019
Zip 36,496 KB 22 March 2019
Zip 39,810 KB 22 March 2019
Zip 242 KB 22 March 2019
Zip 505 KB 22 July 2019
Symbols
Zip 4 KB 20 June 2019
Zip 4 KB 20 June 2019


Software Resources

Title Type Version Size Date
PDF v1.0 1333 KB 25 April 2019
PDF v1.1 25363 KB 25 April 2019
PDF v1.6 771 KB 25 April 2019
PDF v1.6 972 KB 25 April 2019
PDF v1.4 10233 KB 25 April 2019
PDF v1.7 4716 KB 25 April 2019
PDF v1.6 22061 KB 25 April 2019
PDF v1.7 2200 KB 25 April 2019
xlsx v1.0.0 249 KB 25 April 2019

Development tools

Title Technical Documents Download
WiSeStudio WiSeStudio User Guide Download

Tools & Softwares

Title Type Size Date
Zip 133 MB 22 March 2019
Zip 4.98 MB 17 May 2019

EVKs

Part Number Wireless Variant User Guides Frequency Band Integrated Antenna Buy Now
RS14100-SB-EVK1 Wi-Fi + BT 5 RS14100 EVK Getting Started Guide Single Band Antenna and u.FL Connector Buy
RS14100-DB-EVK1 Wi-Fi + BT 5 RS14100 EVK Getting Started Guide Dual Band Antenna and u.FL Connector Buy

Modules

Part Number Wireless Variant Datasheet Frequency Band Integrated
Application MCU
Flash + RAM Dimensions
(l x w x h; mm)
Package Type,
Pin Count
Integrated Antenna Buy Now
RS14100-DB00-140F-CC1 Wi-Fi + BT 5 Datasheet Dual Band 100 MHz 4 MB + 208 KB 15.0 x 15.70 x 2.2 LGA, 107 Antenna and u.FL Connector Buy
RS14100-DB00-140F-CC1 Wi-Fi + BT 5 Datasheet Dual Band 100 MHz 4 MB + 208 KB 15.0 x 15.70 x 2.2 LGA, 107 Antenna and u.FL Connector Buy