RS9113PMOD

LGA Module

16 mm X 27 mm X 3.1

RS9113 PMOD Multi-protocol Wireless Card (Dual-band 802.11 a/b/g/n + Bluetooth 4.0 + ZigBee)

RS9113 PMOD Multi Protocol Wireless Card is based on Redpine Signals RS9113 ultra-low-power dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. Read more


Description

The RS9113 PMOD Multi Protocol Wireless Card is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The PMOD RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a UART, SPI interface. The RS9113 PMOD Multi Protocol Wireless Card integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine's proven low power innovations from Lite-FiTM products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices.

Design Diagram

RS9113module
RS9113 PMOD Multi Protocol Wireless Card Block Diagram

Features and Benefits

  • RS9113 PMOD Multi Protocol Wireless Card module integrates WLAN, BT 4.0 and ZigBee functions.
  • WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
  • Bluetooth: Compliant to dual-mode Bluetooth V4.0.
  • ZigBee: Compliant to IEEE 802.15.4.
  • Supports 20MHz bandwidth.
  • WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm.
  • Support for Bluetooth Transmit power class-1 with integrated PA and high performance Bluetooth receiver with -94dBm Rx sensitivity.
  • Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform ance ZigBee receiver with -100dBm Rx sensitivity.
  • U.FL connector for external antenna connection is selectable.
  • Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server.
  • Support for Embedded Client mode and Access Point mode.
  • BT profile support for GAP, SPP, GATT, IAP.
  • Supports for ZigBee profiles like Home-automation and Smart Energy.
  • Supports SPI, UART host interfaces.
  • Can operate with 8-bit microcontrollers with no OS.
  • Single supply 3.0 to 3.6 V operation.

Renesas Synergy Driver Features

  • Compliant with Renesas Synergy SSP, Wi-Fi add-on and e2 Studio (check the zip file for exact version compatibility)
  • Supports Wi-Fi connectivity in NetX and on-chip stack mode (check the zip file for the current features)
  • Wi-Fi Access Point (AP) mode
  • Wi-Fi Station (STA) mode
  • Wi-Fi Security types - Open, WPA, WPA-2
  • Uses RS9113 SPI host interface
  • Includes fully-functional demo applications showcasing WI-Fi AP, STA, Security, and Web Server using ThreadX services
  • Supports RS9113 PMOD card and RS9113 EVK board

Device Ordering Information

The device numbering is based on the following naming convention. All the devices are labeled as RS9113-NBZ-D5W Where.

Applications

  • Smart phones, Tablets and e-Readers
  • MP3 music and MP4 video players
  • VoWi-Fi phones
  • Medical Devices
  • Smart Meters and in-home displays
  • Industrial monitoring and control
  • Industrial automation and telemetry
  • Home and building automation
  • Wi-Fi-BT gateway device
  • Wi-Fi-ZB gateway device
  • Wireless headset

Wireless Specifications

  • IEEE 802.11a/b/g/n, 802.11j, 802.11n, 802.11d/e/i, 802.11w 802.1X, 802.11k/r/v/h
    Bluetooth v2.1 + EDR, v4.0
    802.15.4-2009 (2.4GHz)
  • 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7)
    802.11a/g: from 6 Mbps to 54 Mbps
    802.11b: from 1 Mbps to 11 Mbps
    Bluetooth: 1, 2, 3Mbps
    802.15.4-2009: 250Kbps
  • OFDM with BPSK, QPSK, 16-QAM, 64-QAM
    802.11b with CCK and DSSS
    Bluetooth: GFSK, DQPSK, 8DPSK
    802.15.4-2009: DSSS
  • 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream
    STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU
    inside A-MPDU and Virtual AP support
  • CCM* security, orphan scanning, coordinator realignment
  • Wi-Fi client, Access point, Wi-Fi Direct
  • Master, slave, scatternet
  • ZigBee Coordinator, Router, End device
  • WMM and WMM Power Save Support
  • SPI, UART
  • I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and Ultra-low-power peripherals.
  • 3.0-3.6V
  • Industrial Grade -40°C to +85°C
  • Wi-Fi Alliance Compliance (802.11abgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct,
    Protected management frames),
    Bluetooth-SIG (QDID-D030907),
    Worldwide Regulatory Compliance:
    FCC(IDs are XF6-RS9113SB, XF6-RS913DB)
    IC(IDs are 8407A-RS9113SB, 8407A-RS9113DB),
    CE/ETSI,
    TELEC,
    SRRC
  • Wi-Fi: 17.5 dBm for 802.11b DSSS
    17.5 dBm for 802.11g/n OFDM
    12 dBm for 802.11a/g/n OFDM
    Bluetooth: 15 dBm
    ZigBee: 15 dBm
  • Wi-Fi: 1 Mbps -97 dBm (< 8% PER)
    54 Mbps -76.5 dBm (< 10% PER)
    MCS7 (20MHz) -73 dBm (< 10% PER)
    MCS7 (40MHz) -69.5 dBm (< 10% PER)
    Bluetooth: 1 Mbps -94 dBm
    2 Mbps -92 dBm
    3 Mbps -84 dBm
    BTLE (1Mbps) -91 dBm
    ZigBee: 250 Kbps -102 dBm (< 8% PER)
  • : These features are not supported by current software releases. Contact Redpine Signals sales (sales@redpinesignals.com) for details.

Product Brief

Title Type Size Date
PDF 647 KB Aug 2017


Datasheet

Title Type Version Size Date
PDF v1.0 1.11 MB Feb 2016


EVK Resources

Title Type Version Size Date
PDF v1.1 150 KB Jan 2017
PDF v8.0 128 KB Jan 2016
PDF 2.27 MB Jun 2017
PDF v2.7 6.16 MB Dec 2017
PDF v1.1 215 KB Jun 2017


Hardware Resources

Title Type Version Size Date
3D Models Dimensions
Zip v1.1 2.74 MB Jul 2017
Allegro Footprints
Zip v1.1 23.3 KB Jun 2017
Symbols
Zip (.OLB) v1.1 4 KB Jun 2017
Zip (.OLB) v1.1 559 KB Jun 2017
Certifications and Declarations
Zip 39.8 MB Aug 2017
Zip 16.1 MB Jan 2015
Zip 10.8 MB Feb 2015
Zip 625 KB May 2016
ZIP 926 KB Mar 2016
Zip 242 KB Nov 2018
Zip 30 KB May 2018


Software Resources

Title Type Version Size Date
PDF v1.7.6 2.74 MB May 2019
PDF v1.7.6 2.41 MB May 2019
PDF v1.7.6 2.88 MB May 2019
PDF v1.4 4.53 MB May 2019
PDF v0.5 4.47 MB May 2018
PDF v1.7.6 6.28 MB May 2019
PDF v1.7.6 2.80 MB May 2019
PDF v1.7.6 2.05 MB May 2019
PDF v1.1 887 KB Aug 2015
PDF v1.0 2.54 MB Apr 2016
PDF v1.1 442 KB Feb 2017
xlsx v1.7.3 256 KB Dec 2015
PDF v1.2 636 KB Dec 2017

Tools & Softwares

Title Type Size Date
Zip 21.85 MB Jan 2017